M5 runs on Linux, Mac OS X, OpenBSD, and Microsoft Windows (under Cygwin), but should be easily portable to other Unix-like OSes. Cross-endian support has been mostly added, however this has not been extensively tested. All the syscall emulation (_SE) targets support running regardless of host/target endianess, however at present ALPHA_FS does not fully support big endian machines.
To build M5, you will need the following software:
- g++ version 3.4.6 or newer. < 3.4 seems to have some issues with templates or internal compiler errors prevent compilation.
- Python, version 2.4 or newer. M5 links in the Python interpreter, so you need the Python header files and shared library (e.g., /usr/lib/libpython2.4.so) in addition to the interpreter executable. These may or may not be installed by default. For example, on Debian/Ubuntu, you need the "python-dev" package in addition to the "python" package. If you need a newer or different Python installation but can't or don't want to upgrade the default Python on your system, see our page on using a non-default Python installation.
- SCons, version 0.98.1 or newer. SCons is a powerful replacement for make. See here to download SCons. If you don't have administrator privileges on your machine, you can use the "scons-local" package to install scons in your m5 directory, or install SCons in your home directory using the '--prefix=' option.
- SWIG, version 1.3.28 or newer.
- zlib, any recent version. For Debian/Ubuntu, you will need the "zlib-dev" or "zlib1g-dev" package to get the zlib.h header file as well as the library itself.
- m4, the macro processor.
There a few utility scripts written in Perl, but Perl is not necessary to build or run the simulator.
M5 can build many binaries each for a different guest architecture, simulation mode, and use. The currently available architectures are ALPHA, SPARC, and MIPS.
Each of these can built in two simulation modes:
- FS - Full System mode. This mode simulates a complete system including a kernel, I/O devices, etc. This mode currently only works with the ALPHA architecture.
- SE - Syscall Emulation mode. This mode simulates statically compiled binaries by functionally emulating any syscall they make.
For each possible architecture and mode, several different executables can be built:
- m5.debug - A binary used for debugging without any optimizations. Since no optimizations are done this binary is compiled the fastest, however since no optimizations are done it executes very slowly. (-g3 -gdwarf-2 -O0).
- m5.opt - A binary with debugging and optimization. This binary executes much faster than the debug binary and still provides all the debugging facility of the debug version. However when debugging source code it can be more difficult to use that the debug target. (-g -O3)
- m5.prof - This binary is like the opt target, however it also includes profiling support suitable for use with gprof. (-O3 -g -pg).
- m5.fast - This binary is the fastest binary and all debugging support is removed from the binary (including trace support). (-O3 -DNDEBUG)
Starting in the root of the source tree, you can build M5 using a command of the form:
% scons build/<arch>_<mode>/m5.<binary>
where the items between <> are the architectures, modes and binaries listed above. For example:
% cd m5 % scons build/ALPHA_FS/m5.debug scons: Reading SConscript files ... Checking for C header file fenv.h... yes Building in /tmp/m5/build/ALPHA_FS Options file /tmp/m5/build/options/ALPHA_FS not found, using defaults in build_opts/ALPHA_FS Compiling in ALPHA_FS with MySQL support. scons: done reading SConscript files. scons: Building targets ... g++ -o build/ALPHA_FS/base/circlebuf.do -c -pipe -fno-strict-aliasing -Wall -Wno-sign-compare -Werror -Wundef -g3 -gdwarf-2 -O0 -DTHE_ISA=ALPHA_ISA -DDEBUG -Iext/dnet -I/usr/include/python2.4 -Ibuild/libelf/include -I/usr/include/mysql -Ibuild/ALPHA_FS build/ALPHA_FS/base/circlebuf.cc ...
If your output looked like the above, then congratulations, you've compiled M5! The final binary is located at the path you specified in the argument to scons, e.g., build/ALPHA_FS/m5.debug. For more build options and further details about the build system, see the SCons build system page.
Installing full system files
If you want to run the full-system version (including the full-system regression tests), you will also need to download the full-system files (disk images and binaries) from the Download page.
The path to these files is determined in configs/common/SysPaths.py. There are a couple of default paths hard-coded into this script; you can place the system files at one of those paths, edit SysPaths.py to change those paths, or override the paths in that file by setting your M5_PATH environment variable. If this is not done correctly you will see an error like
ImportError: Can't find a path to system files. when you first attempt to run the simulator in full-system mode.
For example (where <NNNN> is a group containing all users of M5, and you will need to edit the tar file name and path to reflect the version you downloaded and where you put it):
% sudo mkdir -p /dist/m5/system % cd /dist/m5/system % sudo tar vxfj <path>/m5_system_2.0b3.tar.bz2 % sudo mv m5_system_2.0b3/* . ; sudo rmdir m5_system_2.0b3/ % sudo chgrp -R <NNNN> /dist
Testing your build
Once you've compiled M5, you can verify that the build worked by running regression tests. Regression tests are also run via scons. The command to run all tests for a particular is constructed as follows:
% scons build/<target>/tests/<binary>
For example, to run the regression tests on ALPHA_FS/m5.opt, type:
% scons build/ALPHA_FS/tests/opt
The regression framework is integrated into the scons build process, so the command above will (re)build ALPHA_FS/m5.opt if necessary before running the tests. Also thanks to scons's dependence tracking, tests will be re-run only if the binary has been rebuilt since the last time the test was run. If the previous test run is still valid (as far as scons can tell), only a brief pass/fail message will be printed out based on the result of that previous test, rather than the full output and statistics diff that is printed when the test is actually executed.
Regression tests are further subdivided into three categories ("quick", "medium", and "long") based on runtime. You can run only the tests in a particular category by adding that category name to the target path, e.g.:
% scons build/ALPHA_FS/tests/opt/quick
(Note that currently the "medium" category is empty; all of the tests are "quick" or "long".)
Specific tests can be run by appending the test name:
% scons build/ALPHA_FS/tests/opt/quick/10.linux-boot
For more details, see Regression Tests.